In this example, unplugging the Logitech Extreme 3D joystick will result in the F310 Gamepad moving up to slot 1. A Locked, but disconnected 'MadCatz GamePad (Controller)' which is a MadCatz Xbox 360 Controller.
An unlocked 'Gamepad F310 (Controller)' which is a Logitech F310 gamepad.An unlocked 'Logitech Extreme 3D' joystick.This device will stay in this position unless dragged somewhere else or unlocked A Locked 'Logitech Attack 3' joystick.If you unplug one or more of the set of devices, the positions of the others may move, they should return to the proper locked slots when all devices are reconnected.Įxample: The image above shows 4 devices: If you re-arrange the ports (take one device and plug it into a new port instead of swapping) the behavior is not determinate (the devices may swap slots). If you switch the ports of two identical devices the lock should follow the port, not the device. Note: If you have two or more of the same device, they should maintain their position as long as all devices remain plugged into the computer in the same ports they were locked in. In this setup, a streaming camera is set up on the robot (Ethernet camera, or USB camera connected to roboRIO). Devices can be unlocked (and unconnected devices removed) by double clicking on the entry. 3.4 Vision Processing on the Driver’s Station While the LigerBots do not have any experience with this setup, many teams have success-fully used vision processing on the Driver’s Station (DS) laptop. A locked device will reserve it's slot even when the device is not connected to the computer (shown as grayed out and underlined).
Id be happy to put it up on Google Drive (if NI is alright with that) but Id rather not host it there forever.
#Frc driver station camera update#
'Locked' devices will show up with an underline under the device. LVnuBee I dont have the FRC 2016 software but I do have the FRC 2017 software (both the major LV development system and the FRC update ZIP files) and it also has support for the cRIOs. This is done automatically if the device is dragged to a new position and can also be triggered by double clicking on the device. The Driver Station has the capability of 'locking' a USB device into a specific slot. The FRC 2018 Update Suite is a mandatory update for all FRC teams. FRC Driver Station LabVIEW Dashboard The Dashboard application installed and launched by the FRC Driver Station is a LabVIEW program designed to provide teams with basic feedback from their robot, with the ability to expand and customize the information to suit their needs.
#Frc driver station camera download#
However we don't have the USB key that contains the tools like the FRC driver station and have instead had to download the. Hopefully, they’ve also read the documentation. Any serious driver will have tested every tab and button on this program. It’s the tool we use to drive our robots, whether in competition or back at the shop. Content for LabVIEW as well as the Driver station and Utilities that ALL FRC teams will. Every FRC team is familiar with the FRC Driver Station software.
0 kommentar(er)
